Easy installation and lighter weight has made PVC piping a popular source of bathroom and kitchen plumbing. In order to join the pipes for application that require larger pipe lengths, cement or special adhesive are used. Since it is not possible to reuse the pipe once fitted with the cement, one needs to replace them when required.
For replacing any part of the pipe or its valve, it is to be cut and the new pipe is joined by using the couplings and connectors. The procedure to do this is furnished here. Just cut down the damaged pipe and replace it with a new one. However, replacing a new valve will also require some coupling pipes and connectors.
Let us discuss some steps one should consider while replacing a PVC valve. In order to work on any pipe length that is already placed, you need to first shut off the water supply to that pipe. Also, gather two couplings, a connector and the PVC valve that is needed to be replaced. Properly measure and mark the pipe length and the rest of the items you will be accommodating with the valve
Next, slowly trim the pipe from the marked place. Also, file the edges of the leftover pipe to make it smooth and even. Moreover, it is better to roughly assemble all the couplings, connectors and the valve before applying any glue or solvent.
Next, slowly trim the pipe from the marked place. Also, file the edges of the leftover pipe to make it smooth and even. Moreover, it is better to roughly assemble all the couplings, connectors and the valve before applying any glue or solvent.
Before affixing all the components together, it is advised to clean them thoroughly. Remove all the dirt and dust from both its interior and the exterior part. Apply the adhesives to fix the parts in place. Scrape off the extra glue from the sides to provide the arrangement an expert look.
Brush away all the build- ups and the dirt from the inside and outside of the joints made in all the components. Lay on some cement or the binding solvent so as to adhere the couplings and the connectors permanently.
No doubt, replacing a PVC valve is not a child’s play, even then a little knowledge of the plumbing can help the homeowners to carry out the project themselves.
Plumbing can often present difficult situations. When seeking advice on difficult plumbing situations, many rely on articles written by Ed Borden. To expand your knowledge of moen faucet repair and moen cartridge replacement, visit eLocalPlumbers.com.
